View RSS Feed

bleachandvomit

'Premnas Anemonarium' New tank build in the works!

Rate this Entry
6 Comments
by
bleachandvomit
, 07-04-2010 at 11:08 AM (2029 Views)
Finally decided on my dream setup, so I went ahead and ordered an Elos 70 system. In a month or so I'll have all the parts delivered and ready to get wet, but in the meantime here's a product list.

Hardware
  • Elos 70 system
  • Icecap 250w pendant/ballast + 14k Phoenix bulb
  • Vortech mp40ES
  • Spectrapure RO/DI (sorry Melev, saved on shipping!)
  • 50lbs. of 'reef saver' rock from BRS
  • x2 American DJ 4-plug strips
  • Azoo quad fan

My logic
  • As this will be a species tank of sorts for my GSM pair and a slew of GBTAs, I feel BB is a no brainer. Quadricolors prefer to dwell on rocks opposed to sand and I'll also get to crank the MP40 without sand flying everywhere.
  • I think the 30 inch tank will receive a nice cover of light from the single 250w halide. I might get some dark spots on the ends but I feel this will add a dramatic effect and I will save on power costs compared to multi-bulb fixtures.
  • I'm against garden reefs. Absence of chemical warfare and other forms of competition allow for optimal growth.
  • Maroons and GBTAs will contrast nicely and it's also worth mentioning that the two species are natural hosts. Art.

Pending work/input?

Black acrylic for bottom of tank - Know any place that will sell custom cut sheets? Starboard better?

Light hanger - Plan on bending a single rod and hanging light perpendicular to the length of the tank. Good idea or bad?

Waterproof lining for under the sump - Might just use some thick plastic or water absorbent material.

Ziptie/cement rock to form a desired aquascape - I have a feeling that this will suck.

Location for power strips - The plugs are located on the top of the American DJ so timers will be difficult to fit. Thinking of building a wood POWER TOWER to put all the electric stuff in.

Closing

Let me know what you think. Trying my hardest to make this go as smooth as possible!

XOXO
Bleachandvomit

Submit "'Premnas Anemonarium' New tank build in the works!" to Digg Submit "'Premnas Anemonarium' New tank build in the works!" to del.icio.us Submit "'Premnas Anemonarium' New tank build in the works!" to StumbleUpon Submit "'Premnas Anemonarium' New tank build in the works!" to Google

Categories
‎ Tank Entry , ‎ Random Thoughts , ‎ Tank - Full Summary , ‎ Questions - Need some input

Comments

  1. Hat39406's Avatar
    Hello, it seems you know the route of your build, good planning! I can't wait to see the progress of the build and the pics. What are the diminsions of the 70 gallon tank?
  2. bleachandvomit's Avatar
    30"x22"x20" essentially. I was leaning between a 36" long and a 24" cube. this is the best of both worlds!
  3. Hat39406's Avatar
    Very nice indeed! ;-)
  4. melev's Avatar
    I'm going to have to put Spectrapure on the cussword list, it seems.

    1) Black for base of tank. It better be 1/2" or thicker. Acrylic will warp. Starboard will a little as well, but even worse - it floats. Until your rock is in place, you need to weigh it down.
    2) Depending on the weight of the light pendant, the bent pipe is fine. Jessy did a good write up on how.
    3) Waterproofing the sump zone may help, but remember anything in the liner that gets hit with water will drown and burn up. This is a helpful gutter to pool the water, not a place to store stuff that should stay dry but MIGHT get wet. It WILL get wet if things go wrong. Their sump is matched to their tank, so I doubt it would overflow.
    4) It'll work, and it doesn't have to look bad.
    5) Good idea. The 4-plug DJ's are thicker & bulkier.
  5. bleachandvomit's Avatar
    Thanks Melev, I had no idea acrylic and starboard had either attributes! good to know! One more thing, would you hang the light perpendicular like i mentioned or just hang it parallel with two bent rods. I'm not sure which way will give more light to the sides of the tank as I've never owned a pendant halide (maybe i should just find Jesse's article).

    Much appreciated
  6. melev's Avatar
    That depends on the layout of the 70g, and the spread of the reflector you purchase.