3Ds of Syed's 320G Rimless Reef
by
, 12-24-2012 at 12:12 AM (8954 Views)
So guys.....here we go...
I made some 3Ds of Rimless. any suggestion..... I got question for all of you.... Do you thing 120cm L x 100cm W x 60cm H with 12MM Tempered Glass will go without eurobracing. I want Pure Rimless.....and open look from top.
More than 12MM starphire is not available in market..... I need your suggestion....
Overall Dimestions with over flow Box
Back Glass Dimensions without overflow Box
![]()
Overflow Box with Dimensions
![]()
Overflow Comb
![]()
Drain 5cm x 3.
Two will be for normal use, one for emergency....
![]()
guys, plan changed........ I made little changes. Height is 70cm instead of 60cm. 3cm x 12mm glass braces..... at the top.
So guys here we go...
Sump plan
90cm L x 50cm H x 60cm W - 60 Gallon
As normal 8mm Glass...
* Sump will hold Skimmer, Po4 reactor and Activated carbon reactor.
* As normal baffles with 5cm destance and 5cm opening from down.
* 22cm space for backup water collection frpm DT without having flood from the sump.
* 20cm space for return pump.
* 4" x 11" two filter socks.
* Bubble tower with two 4" x 11" filter socks.
* 37cmH x 23cmW.
* 5cm opening at the bottom.
![]()
Sump in the stand
![]()
Another view..... i know man.... rest of the area is empty.....
Stay tune. some thing is coming over there...
![]()
Top down view...
![]()
I put Skimmer and reactors there.....
![]()
Another View
I will keep 10cm space for easy neck removing for cleaning..... I have to change little bit, I think 25 to 30cm space is not enough for removing skimmer from the sump in cause of maintenance or cleaning....
![]()
So here it goes...... How I will utilize rest of the place under DT.....
* 3 reserver for Alk, Cal and Mg.
* Frag Tank 90cm L x 50cm W x 30cm H. Almost 36 Gallon.
* Quarantine Tank 50cm L x 27cm W x 30cm H. Almont 11 Gallon.
This time I am not make RDSB (Remote Deep Sand Bed). DSB will be only in the DT. I reduced and try to compact filteration area and increase other area of the system.....
More detail are coming soon..... stay tune you will see a lot.....
I am not in hurry.... I want every thing must be pre planned. It better to make plan before taking money from pocket..
The other tank will tale place inside the stand is Randy Two Part . I am very much happy with this and got good result in my previous two mix reef tanks.
Alkalinity, Calcium and Magnesium reserve.
Bubble Magus Dosing Pump - Bubble Magus BM-T01 will do it's job and to full fill the chemical requirement of the tank.
still I got some more space inside the stand and Frag Tank 90cm x 50cm x 30cm almost 34 gallons will take place.
Frag Tank
One filter sock will be at the corner of Frag tank to filter unwanted stuff from direct water from DT. i will post complete detailed mockup for each tank how plumbing, overflow and circulation will work.....
stay tuned......
So Quarantine Tank...... Here we go..
Quarantine Tank
I am guy with little different school of thought. My QT will not be totally isolated with whole system.... if required I will isolate the tank form whole system but normally it will run through same system and will all the time connected with Frag tank and sump.
Complete detail of QT ll here. how plumbing, overflow and circulation will work.....
Here all tanks inside the stand.....
Total system volume will be almost 300 plus gallon...
![]()
Another view...
![]()
Another one.....
![]()
Another View...
![]()
DT one the stand.....
![]()
Another view:
![]()
Total system another view:
![]()