View RSS Feed

cyano

Restart Update

Rate this Entry
3 Comments
by
cyano
, 11-16-2012 at 03:41 PM (3434 Views)
Well I thought I would give a quick update on what was going on with my tank restart.

I ordered 50lbs of keylargo rock from Marco Rock that has arrived.

I purchased a 10 gallon tank and filled it up to use as my frag tank, painted the back glass, made a frag rack out of light diffuser, installed a heater, 30 gallon rated biowheel, added a nano korelia, added led lighting, waited for the temperature to level out and started moving over frags. I did not cycle the tank though 5 gallons came directly from the display tank and 5 gallons was freshly made salt water. I did not "cycle" the tank as the corals I moved over were either on their last leg (acans) or extremely hardy (mushrooms).

I ordered 60 lbs of the Tropic Eden Aragonite Reef Flakes that should be arriving today while I am at work.

I ordered all new pre-filters and a new membrane for my RO-DI unit so I can do this thing right.

I also have decided that this would be a perfect time to upgrade my lighting so I have ordered the 48 dimmable led package rated for a 75 gallon sps tank from RapidLed.com that is scheduled to arrive on Monday. I have 4 days off over the Thanksgiving Holiday that I am hoping to take full advantage of and get to work on all of this. whether I get the LED's ready or not by then I am not too worried about, I am more worried about getting the tank cleaned out and ready for livestock ASAP, but I will not be able to start refilling the display tank again until my replacement RO filters arrive which may or may not be before Thanksgiving.

anyone know a good, fast, easy way to clean a tank of corolline algae and other nastiness when it is drained? I would like to be able to have it ready to be aquascaped and filled within 24 hours of draining but ideally as soon as possible and of course I want to avoid damaging the seals during the cleaning process. I have read vinegar and water but I was not sure of the bast way to do that.

So all I lack to start with the main tank is to get my loaner tank from my friends house this weekend. ro filters, and I have to purchase some more salt mix for all the make up water I will be making, and time. I will take pictures and keep everyone updated on the progress.

Submit "Restart Update" to Digg Submit "Restart Update" to del.icio.us Submit "Restart Update" to StumbleUpon Submit "Restart Update" to Google

Tags: cleaning, DIY, led, restart
Categories
‎ Tank Entry , ‎ DIY projects

Comments

  1. Midnight's Avatar
    Get a couple of gallons of muriatic acid, fill with water dump in acid and drop in pump for circulation. when ready to scrub after a few hours use rubber gloves. before dumping water, neutralize water with baking soda.
  2. Alaska_Phil's Avatar
    Start with a razor blade on the glass. Let the seems soak in vinegar for a few hours and you should be able to wipe them clean with no problem.
  3. cyano's Avatar
    well I literally just finished with getting the leds placed and I am hoping to get them wired up tomorrow during the annual turkey day cooking wait. I will hopefully hit they tank Saturday morning early and get it done by that afternoon and start filling it up Sunday. I need to get the back glass painted, the inside cleaned, all inhabitants safely moved to a temporary tank, re-aquascaped, and filled and if I can get all that done by sunday I will be a happy camper. I think i will try the spray bottle of vinegar and water/soak and see what happens, I am mostly just wanting to clean the back glass the front is not a big issue to clean but the back glass I can't get anything to put a dent in the coralline on it.