View RSS Feed

melev

Recent acrylic construction

Rate this Entry
7 Comments
by
melev
, 10-02-2011 at 12:58 PM (2129 Views)
I had a special request for a large container to hold top off water for the 199-gallon sump I built. The customer requested two quotes, one for 1/4" material and one for 3/8" material. In the end, 1/4" was selected although 3/8" would have been the better choice.

Name: ato_vessel-3.jpg Views: 1749 Size: 84.8 KB


Name: ato_vessel-2.jpg Views: 1836 Size: 62.1 KB


Also, I had a special order for a fan bracket for a sump I'd already built. The fans are 4 3/4" square, but the power plug required one direction to be 5" wide.

Name: fan_tray-4.jpg Views: 506 Size: 104.9 KB


Name: fan_tray.jpg Views: 491 Size: 100.3 KB


Name: fan_tray-3.jpg Views: 473 Size: 100.2 KB


It was a perfect fit and just needs to be wired up to some power.

Name: fantray_on_sump.jpg Views: 533 Size: 142.4 KB


If the fans create vibration noise, four rubber feet will be glued to the corners of the fan to dampen it away. These are found at Home Depot and are often sold to silence cabinet doors that slam against their wood frame.

Name: fantray_on_sump-2.jpg Views: 491 Size: 114.0 KB

Submit "Recent acrylic construction" to Digg Submit "Recent acrylic construction" to del.icio.us Submit "Recent acrylic construction" to StumbleUpon Submit "Recent acrylic construction" to Google

Tags: fan tray
Categories
‎ melevsreef

Comments

  1. Midnight's Avatar
    I'm curious why they would want the opening so large for a top off reservoir?
  2. steve8855's Avatar
    any chance you can post pictures of how you built that top off cotainer i would like to try and build my own but im afrad it will end up leaking

    How do you know how thicl the accrilic should be ?
  3. chuck's Avatar
    nice work as always Marc


    here is a link to acrylic thickness i found

    http://www.plasticgenius.com/2009/05/calculate-aquarium-thickness.html
  4. Bobbywade's Avatar
    The fan tray works great the fans make zero noise cant even be heard and create a nice ripple in the sump and can cool the tank down 1 degree in less than about 5-10 mins run time. Thanks Marc
  5. dahenley's Avatar
    those fans are "sunon" brand. (from what i saw)
    those are the quietest 110-115V fans i have found....
    Great job there Marc. (do you mind sharing the size of your ATO container)
  6. melev's Avatar
    Quote Originally Posted by Midnight
    I'm curious why they would want the opening so large for a top off reservoir?
    I asked what the customer wanted and made it accordingly. I didn't know if it needed a top, but was told not to make one. Without knowing exactly how it would be used, the opening was large enough to do most tasks from any direction.

    The container is 23 3/4" x 23 3/4" x 16". It holds about 36g using internal measurements, but I have a feeling it is going to deflect on all four walls considerably. 3/8" is what he should have used. It's the thickness I used for my own ATO that holds 45g of RO/DI water.
  7. Bobbywade's Avatar
    Quote Originally Posted by dahenley
    those fans are "sunon" brand. (from what i saw)
    those are the quietest 110-115V fans i have found....
    Great job there Marc. (do you mind sharing the size of your ATO container)
    Yes they are sunon brand sold by grainger I have a whole case of them so I thought I put them to use.