October 10th makes the reef 23 months old today. It's been doing quite well, and runs on autopilot. I have a few new frags in the frag tank that will soon be placed in the reef, and I have to determine the perfect spots for those. Here are some new pictures taken today. How many of the 17 clownfish can you count? ...
Updated 10-11-2015 at 02:46 PM by melev
I mentioned the leak detect float switches in my last blog. So I figured I would post so information on them here. In the first photo is one bracket assembles and the parts for the second bracket. The second photo has the marks used to drill the hole for the float switch on the small part and the holes for the mounting screws on the long part. For this I used a combination square. I admusted it to near center to make the marks. This got me 2 parallel line. I just drilled the holes in the center ...
I just ordered some pretty SPS frags that will arrive next week. New video uploading now to Youtube. This week's topic is about skimmers, and this is going into my system soon. It's the largest NYOS Quantum skimmer, which is brand new to the market. I saw it at MACNA, and they asked me to give it a review so I'll be running it for a couple of months in my system.
I spotted something interesting, so I grabbed a Top Down Photo box and my Nikon and get a few nice images tonight. This first image is why I wanted to take a picture. These frags are growing and swirling together. There are three montiporas co-mingling at the moment. This is one of the Montipora that lost all its color 13 months ago that I discussed in the Prodibio presentation I recently gave at MACNA. That entire presentation is on Youtube ...
I ran a leak simulation this weekend. I actually ran my Drinking water RO output to the tank and let it run down the outside of the tank to simulate an overfill, splash down the side or a leak at the seam of the tank. I let it run until the leak detection float switch was tripped. I only had a little puddle on the bottom outer frame at one of the side doors and a trickle in the front electronics compartmant where the conduit enters. A single drop ran down the back panel of the compartment. I have ...
Updated 09-22-2015 at 09:12 PM by n2585722