Blog Comments

  1. jlemoine2's Avatar
    I've been using the Bulk Reef Supply bio-pellets. They seem to work fine to me, and I have not experienced any problems with clumping at low flow rates. I'm using a NextReef SMR1 reactor with them.

    ReefWerks, in your opinion, what makes Vertex or Dr Tim's variants far better than NPX or other brands?
  2. ReefWerks's Avatar
    I have used them and sold them. Decent pellet but far from Vertex or Dr.Tims Active Pearls which we stock. if you want a good start to pellets, I recommend using vertex or AP's...I can send you more info and pricing if you are interested.
  3. baker.shawn's Avatar
    love the sun coral!
  4. Hat39406's Avatar
    Your tank is looking good, Steve! Those Sun Corals are beautiful.
  5. ReefWerks's Avatar
    Then youre solid!
  6. steve8855's Avatar
    thanks its a small tank so only about 2 or 3 feet up
  7. ReefWerks's Avatar
    She looks good...Only question is:
    How much height between sump and tank?
    If you are heating the sump it will lose temp on the way up, factor in ambient room temp. Just my only question/feedback...
  8. a whiff of grapeshot's Avatar
    algaes do absorb the light but they use that energy for growth and reproduction when its dark. one half of photosynthesis occurs when the lights are on, the other half occurs when the lights are off. when algae is constantly exposed to light it will act unnaturally and go wild... its important to have a dark period to regulate how the algae will behave. i suggest you dont make any fast, drastic changes, go slow...
  9. DJ in WV's Avatar
    I dint know that Marc I should probably start cutting mine back some. I learn something everyday, us hillbillys are always out of the loop Would defiantly help on my electric bill
  10. melev's Avatar
    13 hours is much too long. 9 hours maximum. Most photosynthetic stuff stops production in 5-6 hours time, if I recall correctly. After that, the excessive lighting can actually exhaust coral growth. Algae grows at lesser wave-lengths which is why it is thriving in what would be poor conditions. Occasionally people post about how they traveled on vacation and their lights never shut off resulting in a massive algae outbreak and coral losses because the lights ran for days and days.
  11. DJ in WV's Avatar
    I run my lights 12 hours a day 1 hour 330watts of blue next hour I add 330watts of tri band next 8 hours I add in the 3 250 14k mh than reverse to shut down and dont have any algae trouble and only have 10 hermits and 4 Mexican turbos for the cuc in a 180. I would say either water or the light spectrum of the leds. I have a marineland led on my 72 bow African tank and it grows mad algae red and green
  12. cyano's Avatar
    one thing to take into consideration is how often you do a water change, you may read low nitrates or phosphates due to the algae consuming it all
  13. Blake's Avatar
    I agree with cyano, we need some more info before we can give proper advice
  14. cyano's Avatar
    can you give us a little more input? what are your water parameters? what type of algae? how fast is it growing? it is normal to have to fight with certain types of algae anyway so depending on the type we will know a little more but to answer your initial question I would say yes you are running your lights too long. 13 hours is a bit of overkill for me but everyone has a little different opinion, what I did with mine was run them slowly higher or lower in hours taking it up or down about 30 minutes at a time over a few weeks to get where I felt was a happy medium, most people run their lights anywhere between 8-10 hours a day I sit at about 9 myself.
  15. melev's Avatar
    Steve, do a 50% water change. That will cut them in half. Each time you do a 50% water change, it will do this. If you did a 30g water change tomorrow, it would measure 10ppm. Do it again in two days, and it'll be 5ppm.

    You don't have to do this all the time, but for now a couple of big ones will help get them under control until you can get that NP reactor up.
  16. baker.shawn's Avatar
    hmm this sure is strange,

    how about filtration, skimmer? how much live rock? do you have good flow?
    are you using RODI? try testing your source water
  17. steve8855's Avatar
    so my tanks been set up for a little over 1 year

    I have 2 clowns, 1 sandsifting sleeper goby, 1 yellow clown goby, 3 chomis, mandarin goby, 1 suncoral 2 pumping xinias, 5 narissi sails 6 cirth snail 10 blue hermit 3 astes snails, and 1 mexica turbo snail.

    I feed the fish a total of 1/2 cube brine and 1/2 cube myssis every day
    and for my sun coral i feed 1 cube mysiss every second day.
  18. baker.shawn's Avatar
    hey steve, how long has your tank been setup? can you give us more info to work from like inhabitants and recent changes? feeding how much and what, when?
  19. melev's Avatar
    Yes, that's the way it works.
  20. steve8855's Avatar
    Thanks Ill have to mix up water as my tanks only 65g
Page 3 of 8 FirstFirst 12345 ... LastLast