Questions - Need some input

So, I'm beginning this blog entry before I upload my pictures. A few days ago I wrote up a blog entry showing a picture that made me think my tank had microbubbles in it. To date it appears better to me, but for comparison's sake I took a few pictures of the tank last night. In one picture the scenario is comparable to the scenario under which the picture from my other post was taken. In the other I have turned off the protein skimmer and then actually shut off the return (for those unfamiliar ...

Attached Thumbnails

     

So I believe I have microbubbles getting into the main tank. I was looking at the water in my skimmer section today and noticed that it had a decent amount of froth on the water's surface (nothing spectacular just some definite buildup of frothy sections). Then I got looking at the skimmer section and noticed a ton of microbubbles, no surprise yet. Then I took a look at my bubble traps. Bubbles were going down the hatch at an alarming rate. Then I looked at the bioball section thinking that ...

Attached Thumbnails

 

Hey guys,

As promised in my most recent post, I am posting some videos of the water test I did today. I have to go to a meeting in a few minutes and my YouTube videos are uploading as we speak so I will add the very first one for now. In all there are four parts about 3 minutes long per piece. The video is a bit more blurry than I would have liked and my amature status as a videographer is clearly on display, but I want to show all of you what I've been up to. Additionally, throughout ...

Hey guys,

I have a picture to show all of you. The kind that an owner gets excited over. Water in the tank!! Here's my tank filled as high as I can currently fill it (the plumbing and overflow box aren't totally finished yet):

At the water's highest point I went ahead and measured the distance from the rim to the water line at all 4 corners. The right hand side of the tank is 1/4" lower than the left hand side of the tank (the ...

Hey guys,

Real quick. I've been saving up for a set of VorTech MP10wES pumps. However, I have a 4ft. long standard shape 75 gallon tank. I was wondering if two MP10s would provide enough flow? To give a bit more background, I am planning to place the MP10s on the tank's sidewalls. That's why I was thinking I could get away with using two MP10s and then just syncing them to be alternately on and off. Any suggestions? Should I use two MP40s instead? One MP40? As guidance, I would ...