View RSS Feed

DIY projects

Do It Yourself projects

  1. The light rack project

    Mark another stage off my list of things to do. The light rack has been assembled and suspended over the tank. I'm going to do a little touch up here and there to make sure no exposed metal will corrode from the salty environment, but I'll have to buy some model paint to do so. Here's how it went...

    The first thing I had to do was warm up the garage. It's been pretty cold recently, and I didn't want to work in 35F if I could avoid it. So I fired up this heater and let it warm up ...

    Updated 01-11-2011 at 02:01 AM by melev

    Categories
    Lighting , ‎ DIY projects
  2. Water test today

    No, not the one you were thinking of. This was to double check my efforts from yesterday. I had to pour water on the new concrete as this helps strengthen it as it cures. I wanted to see where it might flow, and also determine what still needs to be done. This was less than 2 quarts of water poured out.

    You should be able to tell that the right side is drying off while the water is pooling a little toward the left.
    ...
    Categories
    DIY projects
  3. More concrete work... urgh!

    Dragging my feet on this project because frankly I've never done it before and didn't relish the idea of having to deal with it, I filled in where the concrete floor was too low. This was an important hurdle in my eyes, and I was dreading it. In the end, it wasn't awful, but then again I'm not entirely done. Here's how it went.

    The metal stand is up on shims to get the stand and tank completely level. The slab was down nearly 1" at one corner, and any water spills would inevitably ...
    Categories
    Tank Entry , ‎ DIY projects
  4. A few iphone pictures from some current efforts

    The DIY continues unabated. I decided to get the garage side of the walls sheetrocked with 5/8" material (fire grade). That way I could soon use those walls to better use, hanging tools of them or simply using them to lean stuff against. The poofy insulation bats were annoying, and not helping keep the temperature in my house as well as it should.

    It took a couple of hours one afternoon to get the pieces cut and installed.
    ...
    Categories
    Tank Entry , ‎ DIY projects
  5. Sheetrock stuff completed

    I started sheetrocking the fishroom a few weeks ago. That was accomplished and the insulation was installed on the garage side of the walls. Plastic edging was applied to all the corners to keep them clean, tidy and strong.







    ...
    Categories
    DIY projects
Page 5 of 7 FirstFirst ... 34567 LastLast