Blog Comments

I have one of those. One day after feeding pump just did not want to start.

Good blow to air tube helps it to start. But I could not find any permanent fix for that. I guess new pump would fix it.

i run the nac 7 and am running it at around 5". i had it in deeper but was really getting wet skimmate, and was running it at 5. mow i'm at 2, pulling a full cup in 3 days and seems alot drier. watch the meshwheel, one of mine decided to come apart for no reason. make sure you have a spare. it is a good investment.

To get dryer skimmate, lower the water level in the skimmer about 1" and leave it alone. You'll get less skimmate in the cup, and crud will form in the neck.

If you have to pour out watery skimmate often, keep an eye on salinity. Your top off will replenish all that lost water and salinity can gradually drop in the tank.

Thanks for the review.

Nice write-up. Thanks for the review. Did the Coca-Cola also come with it? Seems like a poor way to advertise. ((grin))

What's your real name? It be nice to know who Mustang is.

OOhhh that would have been one of those jokes that was only funny a year later. Any who the weekend will be here soon enough and my wait will be over. Oh but i hate to wait lol

I should have made it arrive on April 1st, and be an empty box save one haydike block of concrete.

Just a quick update i set the barrel up in the fish room and filled it with hot water and some Bleach let it sit for about 12+ hours and that seems to have done the trick i gave it a quick rinse with cold water and that smell seems to be just about gone. So i will let it air dry over night and give it a fill of just hot water again tomorrow let it sit again then drain it and rinse again and should be good to go after that. I should have the RO/DI unit i bought from Marc in my hands on April 2nd and you can be guaranteed that i will probably have it installed on the 3rd. Thanks again all for the suggestions and feedback.
PS If you are curious as to how this is all going to pan out watch for a blog on my set up in mid April.

I may have done it once before I knew. Explained on link below;

http://chemistry.about.com/od/toxicc...nd-Vinegar.htm

Originally Posted by reefocd

Remember,

Never Never Never mix Bleach and Vinegar together. Toxic combination.

Cheers!

really ..... oops!
being a chemistry student you would think i would of thought of this earlyer
2HOCl + 2HCH3COO ↔ Cl2 + 2H2O + 2 CH3COO-
products being chlorine gas, water and acetate.....well now i know

Remember,

Never Never Never mix Bleach and Vinegar together. Toxic combination.

Cheers!

Baking Soda and water works. Where can you get a bunch of hot water outside? Usually you can't. Maybe at a coin operated car wash location.

Muriatic acid works too. However, you need to know where you will pour out the solution when done.

I got my barrels from Dr Pepper and the syrup smell was strong and long lasting. I'd soaked the barrel for a long time - days in fact - but it wouldn't go away. I think it was actually the underside of the top part (aka what we could call the lid). When the barrel was full, that convex area just wasn't getting wet and an airpocket surely existed. I did a lot of rinsing, then decided to stop worrying about the syrupy smell. Never had a problem and used the barrels for years. Still do as needed.

This actually started a nice discussion amongst a few of my local friends. One of my friends did basically the same thing i did but he also made a paste of baking soda and ro water and scrubbed his barrel out with a filter pad and the paste.I guess some may think i went a little crazy on the cleaning.But with the price of livestock and some corals costing a days pay you cant be to careful
happy tanks to ya

I'm thinking if there is something in the container causing a smell, then there is still residue in the container that will likely leach into your water. When using a used container for water storage, you must ensure it is cleaned out. I'm not sure I would go as far as Sumpmonkey did, but certainly a hot water bleach soaking would do the trick. If anything, doing the deep cleaning would give you peace of mind. You don't want to be thinking of your root-beer smelling water every time you try and diagnose a problem with your tank. :-)

Thanks guys both methods sound good and although i don't want to wait and let it air dry for a week i don't think i have a choice. My brother picked up my RO/DI unit ( one of Marc's) as he lives on a boarder town but we missed our first chance to meet up then he forgot it the second time. Ahh family no choice but to love them. I just hate lugging water from my LFS about 30gals a week when i have an RO/DI unit already paid for but is about 4-5hrs away.

i think they key here is to use super hot water + bleach + maybe some soap (dont quote me on that) the hot water will help to open the pores in the plastic and the cleaners you select will...well clean lol makesure you also rinse with super hot water to makesure you get all your cleaing product out...the smell will go away eventually, as long as you know you cleaned it well it should be all you need to sleep well at night while your fresh SW mixes itself

I went old school with my thirty two gallon barrel it was a fruit juice concentrate container grape i think.I filled it with about 30 gallons of water then topped it off with clorox straight bleach ran with a powerhead for three days.Drained it and rinsed it three times let it air out for a week then did five gallons of vinegar mixed with 27 gallons of water ran that for three days.rinsed numerous times.let it air out for a week and never looked back

i though about this to i got a few old marineland 350 canister's that have a large mess container for media by running it in and out of the sump. I had used one in the past on a Malawi tank and filled it with crushed coral to buffer the tank seemed to work ok

Canisters are also generally used as a one device does all solution for complete system filtration though albeit not very well , reactors are used in conjunction with other things and generally is placed in or near a sump which acts as your filtration area as well as equipment area.

canisters normally just trickle down through them and have very low contact time with the media.

A reactor uses an upflow current to fill the chamber completely, plus the tumbling of the media increases contact time for superior performance.

That's pretty much it.