I know this is a really dumb question but I really just have not other Idea what could be going on here. I have tested the parameters in the tank 160 reef 30 - 40 gallon sump. the tank has been running for 10 months now reading over the last three weeks sg 1.027 read with both hydrometer and refractometer am 0, nitrite 0 nitrate 10 ppm cal 385 - 400 alk 9.6 - 10.5 mg 1350 phosphate 0.00 - 0.05 tank temp between 76.7 and 77.9 ...
Ok today I picked up a couple things that I have been neglecting to test in my system. I have never test phosphate until today I am going to begin testing with an ELOS expert line PO4 test kit and I am going to use reef results phosblaster super nuker liquid phosphate remover to remove the phosphate in my system. the claim of this product is 1 point per treatment, the treatment is 10 ml per 50 gallons. I am going to be dosing 40 ML to treat 180 gallon system. the pictures taken ...
Updated 05-23-2010 at 11:34 PM by melev
Hi I'm New here sort of. I have used many of the great articles posted on Melevesreef.com for a few years now, and The DIY section for building Sumps. So here is a little back ground. I began keeping salt water aquariums around 1995. so for the last fifteen years I have had several FOWLR tanks and Three reef tanks two with moderate success. My Current tank is a 150 gallon reef tank that has been mostly DIY. The tank is glass 72x18x28 I drilled the end of the tank and installed ...
Updated 05-07-2010 at 03:53 PM by melev